T-IBJ ELECTRIC SINGLE-ARM ENDOSCOPE PENDANT TOWER

LOTUSMED-T-IBJ ELECTRIC SINGLE-ARM ENDOSCOPE PENDANT TOWER

Technical index and description of LOTUSMED-T-IBJ electric single-arm endoscope pendant tower 

I. Specification:

1. Main material: The cross arm and control box are made of high-strength and high-strength aluminum alloy by one-time extrusion, and the surface is first-level oxidized and sprayed.

2. Electrical requirements: There is no relative movement between the power line and the gas source line and the tower body, so as to ensure that the crane will not accidentally fall off due to the change of position during the movement of the crane tower.

3. Gas and electricity separation: all kinds of medical gases, strong and weak electricity, and network output terminals are integrated on the console, and the gas pipeline, power supply, and computer communication line are separated and arranged without interference.

4. Gas pipeline: imported gas pipeline (can provide import declaration certificate, CE certification, and provide KTW food-grade certification certificate)

5. German standard gas terminal plugging and unplugging more than 100,000 times (third-party test reports can be provided)

6. The colors and shapes are different to avoid mixing and prevent mis-insertion; it has three states of on, unplug, and off, with the function of in-situ waiting to be connected, and can be repaired with air.

7. Imported motor, electric cantilever level lifting and rotation function, accurate positioning without drift. Imported motor, electric cantilever level lifting and rotation function, accurate positioning without drift.

8. Pallet: The pallet is formed by aluminum alloy at one time, and the pallet has a light-stripe non-slip function. The edge of the tray is equipped with international standard stainless steel side rails with rounded corners and anti-collision design.

9. Braking type: mechanical friction damping

10. The support system of the suspended tower should be firm and free of deformation.

11. The rotation of the balance arm of the pendant tower should be light and easy to stay in the selected position stably. The original position should not be changed without external force.

12. There should be no leakage at each interface in the gas path.

13. The suspended tower should be stable, free of jitter, and no abnormal sound when rotating.

14. The earth leakage current of the pendant tower under normal and single fault conditions should be no more than 5mA and 10mA, respectively.

15. Under normal and single fault conditions, the enclosure leakage current of the pendant should be no more than 0.1mA and 0.5mA respectively.

16. The powder coating complies with environmental protection IEC 62321-5:2013, IEC 62321-4:2013+Amdl:2017 and other related certification tests (third-party test reports can be provided)

17. The powder coating complies with GB/T21866-2008 antibacterial test (third-party test report can be provided)

II. Technical Parameters:

Electric arm: 600～1000mm (the length can be selected according to the installation site)

Cross arm thickness ≥75mm

Rotation angle: 340° (adjustable, the range of rotation can cover the area required by the patient) (provide a test report above the provincial level)

Maximum load: 200kgs, the maximum tray of each pallet should not exceed 42kgs, and a single-layer pallet has a safety load of four times the load-bearing factor. (Test reports above the provincial level can be provided)

Lifting height: 400±50mm

Console: 1500～1700mm, adopts advanced modular design to effectively ensure the follow-up expansion and upgrade maintenance of the product.

III. Basic configuration:

1. Fixed disk: 1pc

2. Electric arm: 1

3. Console: 1

4. Instrument tray and drawer: 3 layers of trays, 1 drawer

5. Power socket (three eyes): 8 pcs, with expandability

6. Network RJ45/Phone socket RJ11: 1 set each

7. German-style gas terminal: 1 each for carbon dioxide/compressed air/oxygen/suction gas/anaesthetic gas discharge (various gases are optional)

The number of accessories configured can be flexibly configured according to user requirements.