HSCR81004 MERCURY SPHYGMOMANOMETER

LOTUSMED HSCR81004 MERCURY SPHYGMOMANOMETER

MERCURY SPHYGMOMANOMETER HSCR81004

Sphygmomanometer is known as a blood pressure monitor, or blood pressure gauge, is a device used to measure blood pressure, composed of an inflatable cuff to collapse and then release the artery under the cuff in a controlled manner, and a mercury or aneroid manometer to measure the pressure. 

Manual sphygmomanometers are used with a stethoscope when using the auscultatory technique.

A sphygmomanometer consists of an inflatable cuff, a measuring unit (the mercury manometer, or aneroid gauge), and a mechanism for inflation which may be a manually operated bulb and valve or a pump operated electrically.

Mercury sphygmomanometer (Mercury BP Monitor) is also a clinical trial method applicable to most patients' blood pressure measurements.

During the measurement, the patient should be placed in a supine position or a seat and rest for five minutes, so that the midpoint of the upper limb is located at the level of the heart.

The cuff of the mercury sphygmomanometer and the balloon surround 80% of the upper arm and 100% of the child. The width should cover 40% of the upper arm, sphygmomanometer tied in patients with elbow an inch, a stethoscope is placed on the cuff on the lower limb artery, inflated rapidly, make blood pressure value to estimate of your blood pressure above 20 to 30 mm hg, then open valve uniform deflated, stethoscope and hear the first voice, is the systolic blood pressure, and then the appropriate speed deflated. 

The diastolic blood pressure is when the sound disappears, or the diastolic blood pressure is when the sound suddenly changes. Mercury blood pressure is more accurate.

Specifications:

Measure scope: 0-300mmHg

Accuracy: +/- 3mmHg

Sub-division: 2mmHg

I.D. of glass tube: 2.1+/-0.2mm

Aluminum case

Standard collocation: Nylon cuff with D- ring

PVC bladder and bulb

Color available: blue, grey, black

1 pc in a color gift box

Cuff material: nylon, cotton

Bladder and bulb: PVC, Latex

Method of using LOTUSMED HSCR81004 Mercurial Sphygmomanometer:

1. Reduce physiological changes during blood pressure measurement. Blood pressure measurement should be carried out in a quiet and warm room, ensure that the patient does not eat, smoke, drink coffee, or have a full bladder within a short period of time, and explain the method of blood pressure measurement to reduce the patient's anxiety.

2. When taking a seat, the client should rest his back against the back of the chair, keep his legs uncrossed and his feet flat. Whether the patient is sitting or supine, the midpoint of the upper limb should be at heart level and rest for 5 minutes after positioning.

3. Place the balloon in the center of the brachial artery and wrap it evenly and neatly around the arm. Place the lower edge of the balloon about an inch above the elbow.

4. Set the maximum expansion level (estimated systolic reading plus 30 mm hg is the maximum expansion level).

5. Quickly release the air in the sleeve and wait 30 seconds to inflate it again.

6. Insert stethoscope and make sure it is placed forward.

7. Place the tip of the stethoscope gently over the palpable brachial artery, but seal it, being careful not to place any part of the end of the stethoscope under the blood pressure cuff.

8. Inflate quickly to inflate the airbag to its maximum level.

9. Slowly release the air, so that the pressure to 2~3 mm/s smooth decline.

10. Systolic blood pressure (SYSTolic blood pressure) was recorded in stage one of the Two continuous sounds.

11. No immediate diastolic pressure was recorded during the Corleone stage.

12. Continue listening until you are below 10 mmHg diastolic pressure, and then deflate completely and quickly.

13. Wait a minute or two for a repeat blood pressure measurement in the same arm.